Godox VING V860IIN TTL Li-Ion Flash Kit for Nikon Cameras

Power, speed, and integrated radio transmission make the VING V860IIN TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Nikon cameras. Fully compatible with i-TTL systems, the V860IIN supports many advanced functions and features. Also, it features the Godox 2.4GHz X wireless radio system which provides both master and slave TTL functionality with a range of up to 328'. On top of this, the flash is powerful and versatile, featuring a guide number of 197' at ISO 100 and 200mm along with a zoom range of 20-200mm, which can be expanded to 14mm with the use of the pull-out panel. And, this flash runs off a rechargeable Li-ion battery pack, that ensures fast recharge and long-lasting shoots.

For general operation, the V860IIN features full bounce flash capabilities, including tilting from -7 to 90° and rotation left and right 180°. As a i-TTL-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, 1st and 2nd curtain sync, and much more. Additionally, it can function as an optical master or slave unit if needed.

The flash is compatible with Nikon Z 6II and Z 7II in Manual Mode only (no TTL).

• The Godox 2.4GHz X wireless radio system has an impressive range of 328' along with the ability to choose between 32 channels and set up three groups. The system is compatible with Godox's X series or transmitters for more advanced functionality and setups.
• A powerful guide number of 197' at ISO 100 and 200mm ensures your subjects are properly illuminated.
• A zoom range of 20-200mm, as well as a wide-angle panel that supports 14mm, ensures maximum compatibility with a range of lenses and shooting styles.
• The flash head can tilt from -7 to 90° and rotate 180° both left and right for full bounce capabilities.
• Optical wireless transmission is available with access to four channels and three groups as well as a range of up to 49'.
• An AF assist light is present with a range of 2-32.8'.
• This flash supports various functions, including multi flash, high-speed sync, 1st and 2nd curtain sync, flash exposure compensation, and more.
• The 11.1V, 2000mAh Li-ion polymer battery pack included with the flash will provide recharge times of faster than 1.5 seconds and approximately 650 full-power flashes.
• In addition to the hot shoe and wireless triggering, the V860IIN offers a 2.5mm sync port for a wired connection to a camera or receiver.
• A micro-USB port is available for installing firmware updates.

Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon

The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Nikon's i-TTL system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

• The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.
• You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.
• The integrated scan setting function can help you automatically locate an ID channel with the least interference.
• All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.
• A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.
• The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.
• The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.